ADSS cable is loose tube stranded. Fibers, 250m, are positioned into a loose tube made of high modulus plastics. The tubes are lied with a water-resistant filling compound. The tubes (and Ilers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is lied with filling compound, it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or A T(anti-tracking) outer sheath.
(Fiber Optic Cable) cable is a type of optical fiber cable that contains no conductive metal elements. It is used by electrical utility companies as a communications medium, installed along existing overhead transmission lines and often sharing the same support structures as the electrical conductors.
Fiber Optic Cable is an alternative to OPGW with lower installation cost. The cables are designed to be strong enough to allow lengths of up to 700 metres to be installed between support towers. Fiber Optic Cable cable is designed to be light weight and small in diameter to reduce the load on tower structures due to cable weight, wind, and ice.
In the design of the cable, the internal glass optical fibers are supported with no strain, to maintain low optical loss throughout the life of the cable. The cable is jacketed to prevent moisture from degrading the fibers. The jacket also protects the polymer strength elements from the effect of solar ultraviolet light.
Using single-mode fibers and light wavelengths of either 1310 or 1530 nanometres, circuits up to 100 km long are possible without repeaters. A single cable can carry as many as 144 fibers.
1.Can be installed without shutting off the power
2.Excellent AT performance. The maximum inductive of the operating point of AT sheath can reach 25kV
3.Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops.
4.Large span lengths and the largest span is over 1000m
5.Good performance of tensile strength and temperature
6.The design life span is over 30 years
|G.652||G.655||50/125 pm||62.5/125 pm|
|Attenuation(+20 C)||@ 850 nm||3.0 dB/km||3.3 dB/km|
|@ 1300 nm||1.0 dB/km||£ 1.0 dB/km|
|@ 1310 nm||<0.36dB/km||w 0.40 dB/km|
|@ 1550 nm||0.22 dB/km||0.23 dB/km|
|Bandwidth(Class A)||@ 850 nm||> 500 MHz-km||> 200 MH-km|
|@ 1300 nm||> 1000 MHz-km||> 600 MHz-km|
|Cable Cut-off Wavelength Xcc||1260 nm||w 1450 nm|
|Ref. outer diameter mm|
Ref. Weight (kg/km)
Rec. daily max. Working tension (kN)
|Max. allo wable Working tension (kN)||Break strength (kN)|
Strength member CSA mm2
Modulus of expansion kN/mm2
Heat expansion coefficient xIO^/K
|(m)Suitable span (N ESC Standard.m)|
|PE sheath||AT/ PE sheath||A||B||C||D|
Full Colour Identification
Anhui Yetvo Optoelectronics Technology Co., Ltd. is located in Chuzhou City, Anhui Province, China. It only takes about 2 hours to Shanghai and 18 minutes to Nanjing by fast train. We are a high-tech enterprise that specialized in R&D, production and sales of fiber optic cable. Our current mainly products are central tubular optical cable, layer twisted optical cable, non-metallic optical cable, FTTH fiber optic cable ,optical fibre drop cable, armored optical cable and other types of optical cable and optical fiber jumper, optical fiber adapter, optical fiber accessories and other series of optical products.
At present, our annual production capacity is 3 million core km. Our fast delivery capability, perfect quality management system and perfect after-sales service system guarantee the confidence of our customers from domestic and abroad.
Package and Shipping
Q1:Are you the real factory?
Yes, we are the real factory and warmly welcome you to visit us.
Q2: What is your delivery time?
Generally the lead time is 10-30 days. If you need them urgently, it's negotiable.
Q3:Do you provide samples , it is free or extra ?
Yes, we could offer the sample for free, but do not pay for the freight.
Q4: Whether these products quality assured ?
Most of cables are certificated. Also, we have strict QC and professional test equipment , all products are 100% tested before delivery. Quality is assured.
Q5: If I want to purchase, how to pay ?
Generally we accept T/T, Western Union, Paypal ,Ali Pay.
For first business , amount ≤1000USD,100% in advance.
Amount ≥ 1000USD, 30% T/T in advance, balance before shipment .
Also payment terms are negotiable depending on customer's request.
Q6:How would the goods be shipped?
For large orders: by sea (LCL or FCL)
For small orders: by sea (LCL), by air or by courier services,any of which is optional
Q7:Can your supply OEM products under our brand ?
Yes , it is available to print your logo on the cable and on the packing box according to your design.
Pls feel free to contact us if any questions:
Contact Person: JessieYu
Phone Numder:0086 187 1480 2310