Basic Info.
Model NO.
JSX2024PTC for Bulk Tank Container
Experice
10 Years
Producing Period
>20 Days
Frame Size
20ft
Life Span
<25 Years
Color
Customized
Loading Capacity
24000L for ISO Tank Container
Maximum Gross Weight
35000 Kg for ISO Storage Tank Container
Tare
4350 Kg for Tank Container
Shell Material
Shell Mild Steel Q345b, 5.0mm Shell
Wave Protection Wattle
3PCS for This ISO Tanker Container
Frame Material
Q345b Square Steel Tube
Manhole of This Tank Container
Dia. 20inch Seal Plastic-Lined Steel Tank Cover
Compartment for This Tank Container
Single Compartment of This Tank Container
Strengthen Ribbers
Both Sides and Ends for This Tank Container
Walkway on The Top
Anti-Skid Net Spread on Both Side
Transport Package
by Bulk Cargo Ship / RO-RO/Container Vessel
Specification
6058*2438*2591/mm carbon steel tank container
Trademark
JUSHIXIN
Origin
Mainland of China
HS Code
8609001200
Production Capacity
50units/Month for This ISO Tank Container
Product Description
20 ft Tank Type ISO Hydrogen Peroxide H2O2 Tank Shipping Container
1.Specification for 20Feet 24CBM Suluric&Phosphoric Acid Tank Container:
2. The functions of this series container tanker/Tank Container:
***This series Tank Container are suitable for the transportation of transport Chemical liquid like HYDROFLUDRIC ACID HCI 32% ,CAUSTIC SODA NaOH 32%,NaCl. NaClO etc.,internal strengthen lozenge expanded metal mesh transition,Plastic-lining thickness 16mm anti corrosion.
*** The volume of this Tank Container varies widely from 20 cube meters to 52 cube meters, we can manufacture it according to your needs.
3.More Detailed photos for the tank container:
4.Some pictures of our tank container factory:
5.Feedback about the tank container from our customers:
6.Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 20cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
7.Optional parts for the tanker/tank container:
Volume: 20 cube meters to 52 cube meters
Material: Carbon steel/aluminum/stainless steel material
Medidum: HYDROFLUDRIC ACID HCI 32% ,CAUSTIC SODA NaOH 32%,NaCl. NaClO etc . Chemical Liquid.
8.BRIEF INTRODUCTION TO OUR FACTORY of this tank container:
He Nan Ju Shi Xin, a special transportation equipment manufacturing corporation
with the professional experience more than 30 years, certified by the Chinese
government manufacture,Majored in semi trailer and ISO Storage tank container manufacturing,our
products are mainly exported to Philippine, Ethiopia, Thailand, Myanmar, Vietnam,Congo, Kenya, Tanzania, etc...More than 20 countries.
>>>Certificates
9.FlEXIBLE SERVICE WE PROMISED FOR EACH ITEM FROM OUR FACTORY of tank container:
>>>Offering the one-stop full lifecycle services;
>>>Our ISO storage tank container users will receive 24-hour uninterruptible "Entire Journey" service;
>>>CCC&ISO Agreement, 1 Year Guarantee Term, Main-beam Lifetime Promise;
>>> Small Order Can Be Accepted;
>>>Any Color & Logo Available;
>>>The Product Dimension + Specifications Can Be Designed As Your Needs.
10.Some photos for the delivery of our ISO Storage Tank Container
11.Buying Guides for this ISO storage tank container
**You please send us your enquiry;
**We shall reply you with the quotation within 12 hours;
**We negotiate on the configuration that you need;
**Confirmation of the tech data → sign contract (P/I) → 30% deposit (or L/C issuing)→ production;
**Manufacturing process updated news → completing production;
**Balance payment → ex works → shipment → custom clearance → A/S service for 1 year.
12.FAQ for the ISO Storage Tank Container
1.Specification for 20Feet 24CBM Suluric&Phosphoric Acid Tank Container:
| 20Feet 25CBM T11 Sulfuric&Phosphoric Acid& compound Fertilizer Tank Container with CSC,ASME,LR Certificates | ||||||
| Outer Dimension | Length(mm) | 6058mm | ||||
| Width(mm) | 2438mm | |||||
| Height(mm) | 2591mm | |||||
| Transportation/Storage material | Sulfuric&Phosphoric Acid& compound Fertilizer | |||||
| Max gross weight | 36000 kg | |||||
| Tare weight | 3.6tons(±3%) | |||||
| Type approvals | UN portable tank T11, IMDG, ADR/RID, TIR,CSC, UIC, TC, UK DfT, US-DOT CFR49 | |||||
| Nominal Capacity | 25000L(±0.75%) | |||||
| Portable Tank instruction | T11 | |||||
| Design code | ASME VIII DIV 1 | |||||
| Design temperature | -40 ~ +130 ºC | |||||
| Desgin pressure | 4bar | |||||
| External desgin pressure | 0.41 bar | |||||
| Material | ||||||
| Frame | SPA-H or equivalent | |||||
| Tank Shell | SANS 50028-7 Type 1.4402/1.4404 (C<=0.3%),ASTM A240 316L | |||||
| Finish | Cold Rolled 2B | |||||
| Tank Heads | SANS 50028-7 Type 1.4402/1.4404 (C<=0.3%),ASTM A240 316L | |||||
| Finish | Cold Rolled and polished with 180 grits | |||||
| Maximum allowable working pressure | 4 bar | |||||
| Test pressure | 6 bar | |||||
| 25000L Tank | ||||||
| External desgin pressure | 0.41 bar | |||||
| Shell Nominal | 4.40mm Minimum: 4.2 mm | |||||
| Head Nominal | 4.70mm Minimum: 4.50 mm | |||||
| Manhole | 500 mm, 8 mm × 90 mm Neck Profiled and Compensated,Fort Vale part No. E4D/8518025BT. 8 point fixing with Super Tanktyt Lid seal for corrosive cargo | |||||
| Safety Relief Assembly | 1 × 2½" BSP Supermaxi Highflow relief valve, pressure only model set at +4.4 bar (63.8psi), Fort Vale Part No. 010/16300.1 × provision for a second valve. | |||||
| Air line valve | DN 40 ball valve terminating with 1½" BSP connection and cap, Fort Vale part No. 530/0000G. | |||||
| Top outlet | Provision only, DN80 tank pad, Fort Vale part No. 368/0800,fitted with PTFE gasket & blind flange. | |||||
| Bottom Discharge Prov. | 45°Hi-Lift Footvalve fitted with a clamped butterfly valve terminating with a 3" BSP spigot with cap and chain, Fort Vale part No. 804/0010A. | |||||
| Spill box | Middle spill box fitted around manlid and safety relief valve;rear spill box fitted around airline valve and top outlet provision. Each box equipped with 2 PVC drain tubes. | |||||
| Steam Heating System | 8 longitudinal heating channels provided, giving a total effective heating area 10 square meters. Working pressure 4 bar, test pressure 6 bar. Inlet 3/4" BSP, outlet 3/4" BSP, dust cap fitted. A drainage provision with 3/8" BSP is fitted to the outlet pipe. | |||||
| Remote Control system | Φ 3 mm stainless steel cable coated with plastic is fitted to the bottom rail of right side. And an emergency decal is fitted above the cable. | |||||
| Fusible link | Provision | |||||
| Dipstick | Provision, dipstick bracket is fitted to the neckring of the manlid, | |||||
| Thermometer | Dual scale thermometer, -40~160 ˚C (-40~320 ˚F), fitted on rear end to lower left side. | |||||
| Document holder | Φ 80 mm plastic document holder is fitted to the rear right hand side beam. A drain hole is provided at the lowest point. | |||||
| Insulation & cladding | ||||||
| Insulation | 50 mm thick Rockwool (50kg/m³) where possible | |||||
| Cladding | Shell | 1.8 mm thick white GRP (RAL9010) with butt joints.With 6-off stainless steel strip (0.8*60*C). Sealed by silicone sealant.Φ10mm drain hole per panel on bottom. | ||||
| Ends | 2 mm thick mould GRP end | |||||
| Frame Details | ||||||
| Type | Full frame beam design ISO 1496/3 (1CC) with hollow section bottom rails. | |||||
| Corner castings | ISO 1161 8-off in total | |||||
| Ladder(s) | Non-slip stainless(304 S/S) at rear right hand side | |||||
| Walkway | F type 475mm wide non-slip aluminium | |||||
| Earthing lug | stainless(304 S/S), fitted to rear bottom member | |||||
| Painting | Carbon steel shotblasted to Sa 2½ profile. | |||||
| COATING / INSULATION | ||||||
| Tests | 36000kg | |||||
| Stacking at | 192000kgs | |||||
| Transverse Racking test | 150000 Newtons | |||||
| Impact test at | SRS Method a / at R = 36000 kg | |||||
| SUBSTANCES SUITABLE FOR TRANSPORT :In accordance with the requirements of the applicable regulations and the construction of the tank and its equipment.(Substances not compatible with the tank and/or its accessories are excluded for transport) | ||||||
2. The functions of this series container tanker/Tank Container:
***This series Tank Container are suitable for the transportation of transport Chemical liquid like HYDROFLUDRIC ACID HCI 32% ,CAUSTIC SODA NaOH 32%,NaCl. NaClO etc.,internal strengthen lozenge expanded metal mesh transition,Plastic-lining thickness 16mm anti corrosion.
*** The volume of this Tank Container varies widely from 20 cube meters to 52 cube meters, we can manufacture it according to your needs.
3.More Detailed photos for the tank container:
4.Some pictures of our tank container factory:
5.Feedback about the tank container from our customers:
6.Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 20cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.
7.Optional parts for the tanker/tank container:
Volume: 20 cube meters to 52 cube meters
Material: Carbon steel/aluminum/stainless steel material
Medidum: HYDROFLUDRIC ACID HCI 32% ,CAUSTIC SODA NaOH 32%,NaCl. NaClO etc . Chemical Liquid.
8.BRIEF INTRODUCTION TO OUR FACTORY of this tank container:
He Nan Ju Shi Xin, a special transportation equipment manufacturing corporation
with the professional experience more than 30 years, certified by the Chinese
government manufacture,Majored in semi trailer and ISO Storage tank container manufacturing,our
products are mainly exported to Philippine, Ethiopia, Thailand, Myanmar, Vietnam,Congo, Kenya, Tanzania, etc...More than 20 countries.
>>>Certificates
9.FlEXIBLE SERVICE WE PROMISED FOR EACH ITEM FROM OUR FACTORY of tank container:
>>>Offering the one-stop full lifecycle services;
>>>Our ISO storage tank container users will receive 24-hour uninterruptible "Entire Journey" service;
>>>CCC&ISO Agreement, 1 Year Guarantee Term, Main-beam Lifetime Promise;
>>> Small Order Can Be Accepted;
>>>Any Color & Logo Available;
>>>The Product Dimension + Specifications Can Be Designed As Your Needs.
10.Some photos for the delivery of our ISO Storage Tank Container
11.Buying Guides for this ISO storage tank container
**You please send us your enquiry;
**We shall reply you with the quotation within 12 hours;
**We negotiate on the configuration that you need;
**Confirmation of the tech data → sign contract (P/I) → 30% deposit (or L/C issuing)→ production;
**Manufacturing process updated news → completing production;
**Balance payment → ex works → shipment → custom clearance → A/S service for 1 year.
12.FAQ for the ISO Storage Tank Container
Q: I want the Liquid Tank Container with heating system,especially the steam heating system,can you supply?
A:Yes,the steam heating system is the option configuration,you can choose it as you want.
Q: Do you have the certificates to meet us the transportation ways of the land truck,Sea Boat and Railway?
A:Yeah,of course,but the price will be very different by different transportation ways;So kindly please let me know your exact transportation ways before the quoting;And also the certificates will be ready after the tank container passed all kinds of the testing&inspection.
Q: Do you have the stocked tank containers?
A:Yes,but the price will be higher than the normal one.
Q: Can i have the drawings of this ISO Storage tank containers?
A:Yeah,the existing simple similar drawings of the tank container for your reference only for the beginning,will make the more precise drawings after getting the down payment,and will send this drawing to you for your confirmation before production.
Q: Can i make the discharging valves at the bottom?
A:Yes,the discharging valves can be at the bottom or at the top,you can choose as your actual request.
Q: How can i pay the money without risk?
A:You can pay the money to us via Alibaba Trade Assurance,then the alibaba can guarantee your money safe and the delivery on time.
Q: Can i do your agent in our country or some district?
A:Yes,if you quantity is enough,no problem,the 50units for the first time is okay.
Contact information for this ISO storage tank container
Maggie Suen
Office.:+86-371-55628659
Mobile:+86-13838278359
hnjsx-trailer.en.made-in-china.com
Maggie Suen
Office.:+86-371-55628659
Mobile:+86-13838278359
hnjsx-trailer.en.made-in-china.com