- Overview
- Product Description
- Detailed Photos
- Product Parameters
- Packaging & Shipping
- Company Profile
- FAQ
Basic Info.
Product Description
1) Application
Tension Clamps are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can't cause undue stress to the ADSS cables, so as to ensure the normal lifetime of cables system.
2) Structure and Raw Material
Shackle--Hot dip galvanized steel. Shackle is connected with Reinforcing Pole units.
Twisted Chain Link--Hot dip galvanized steel. Twisted Chain Link is intended for connecting U- Shackle and Clevis Thimble.
Thimble---Hot dip galvanized cast steel. Thimble is plugged in shackle of Tension Clamp for protection and connection.
Armor Rods----- Aluminum clad steel wire. Armor Rods increase friction with a layer of particle emery inside to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.
Preformed Dead End -- Preformed Dead End are made of hot dip galvanized steel wire or aluminum clad steel wire, it is assembled into one subset with a layer of firm emery inside in workshop, in order to increase gripping strength of Tension Clamps while decreasing side pressure.
3)Direction
1. It is designed to connect continue pole (tower) and Terminal pole(tower), tensile pole or line angles above 25.Pole (tower). The special specification: one unit per Terminal pole (tower), two units per tensile pole (tower), two units per continue pole (tower).
2. You can select the Specification Model corresponding to the appropriate cable diameter range, maximum allowable tension (MAT) or Span Length from Data Sheet.
1.1 Low Tensile force Tension Clamp for ADSS Cable
The tension clamp is single preformed rods structure, simple and reliable ,convenient and quick installation, It is specially designed for short span length low tensile force ADSS cables.
Specification Model (Without Preformed Rods) | Suitable Cable Diameter (mm) | Length (mm) | Rubber Model |
| AXJ 1110 020 | 9.0-11.1 | 116 | TD 1110 |
| AXJ 1330 020 | 11.2-13.3 | 116 | TD 1330 |
| AXJ 1550 020 | 13.4-15.5 | 116 | TD 1550 |
| AXJ 1770 020 | 15.6-17.7 | 116 | TD 1770 |
| Specification Model | Suitable Cable Diameter (mm) | Armor Rod Length (mm) | Dead end Rod Length (mm) | Color Code |
| ANF 0900 020 | 8.1-9.0 | 1200 | 700 | Black |
| ANF 1000 020 | 9.1-10.0 | 1200 | 700 | Red |
| ANF 1110 020 | 10.1-11.1 | 1200 | 700 | Orange |
| ANF 1220 020 | 11.2-12.2 | 1200 | 700 | Yellow |
| ANF 1330 020 | 12.3-13.3 | 1200 | 700 | Green |
| ANF 1440 020 | 13.4-14.4 | 1200 | 700 | Cyan |
| ANF 1550 020 | 14.5-15.5 | 1200 | 700 | Blue |
| ANF 1660 020 | 15.6-16.6 | 1200 | 700 | Purple |
| ANF 1770 020 | 16.7-17.7 | 1200 | 700 | Black |
| ANF 1880 020 | 17.8-18.8 | 1200 | 700 | Red |
| Specification Model | Suitable Cable Diameter (mm) | Armor Rods Length (mm) | Dead End Rods Length (mm) | Color Code |
| ANF 0900 030 | 8.1-9.0 | 1400 | 900 | Black |
| ANF 1000 030 | 9.1-10.0 | 1400 | 900 | Red |
| ANF 1110 030 | 10.1-11.1 | 1400 | 900 | Orange |
| ANF 1220 030 | 11.2-12.2 | 1400 | 900 | Yellow |
| ANF 1330 030 | 12.3-13.3 | 1400 | 900 | Green |
| ANF 1440 030 | 13.4-14.4 | 1400 | 900 | Cyan |
| ANF 1550 030 | 14.5-15.5 | 1400 | 900 | Blue |
| ANF 1660 030 | 15.6-16.6 | 1400 | 900 | Purple |
| ANF 1770 030 | 16.7-17.7 | 1400 | 900 | Black |
| ANF 1880 030 | 17.8-18.8 | 1400 | 900 | Red |
| Specification Model | Suitable Cable Diameter (mm) | Armor Rods Length (mm) | Dead End Rods Length (mm) | Color Code |
| ANF 1110 050 | 10.1-11.1 | 1800 | 1200 | Orange |
| ANF 1220 050 | 11.2-12.2 | 1800 | 1200 | Yellow |
| ANF 1330 050 | 12.3-13.3 | 1800 | 1200 | Green |
| ANF 1440 050 | 13.4-14.4 | 1800 | 1200 | Cyan |
| ANF 1550 050 | 14.5-15.5 | 1800 | 1200 | Blue |
| ANF 1660 050 | 15.6-16.6 | 1800 | 1200 | Purple |
| ANF 1770 050 | 16.7-17.7 | 1800 | 1200 | Black |
| ANF 1880 050 | 17.8-18.8 | 1800 | 1200 | Red |
| Specification Model | Suitable Cable Diameter (mm) | Armor Rods Length (mm) | Dead End Rods Length (mm) | Color Code |
| ANF 1110 070 | 10.1-11.1 | 2600 | 1800 | Orange |
| ANF 1220 070 | 11.2-12.2 | 2600 | 1800 | Yellow |
| ANF 1330 070 | 12.3-13.3 | 2600 | 1800 | Green |
| ANF 1440 070 | 13.4-14.4 | 2600 | 1800 | Cyan |
| ANF 1550 070 | 14.5-15.5 | 2600 | 1800 | Blue |
| ANF 1660 070 | 15.6-16.6 | 2600 | 1800 | Purple |
| ANF 1770 070 | 16.7-17.7 | 2600 | 1800 | Black |
| ANF 1880 070 | 17.8-18.8 | 2600 | 1800 | Red |
1. What are the payment terms that you support?
Usually, we accept T/T, PayPal, Western Union, and Alibaba Trade Assurance. You can select the terms of payment that are more convenient for you.
2. What about the lead time?
Usually, if there's stock, we ship the goods within 3~5 working days after the deposit is confirmed. If it is out of stock, the lead time depends.
3. How about the shipping?
When the package is small, we normally choose FedEx, DHL, TNT, UPS, and so on, while the goods have high weight and volume, we suggest using air or sea shipment.
4. How can I place an order?
(1) Negotiation is agreed upon for the product price and specifications.
(2) The Proforma invoice will be sent for confirmation.
(3) After the agreement on the proforma invoice, the customer makes the deposit.
(4) Manufacturing will be started as soon as the payment is confirmed by our bank.
(5) Ship out the goods within the agreed delivery deadline.
5. Can you do OEM for us?
Yes. If there is a certain order quantity, we can do OEM including printing, logo, and customized model for you.
6. How about the Warranty?
There are 12 months for the warranty.
While the warranty is not responsible for those broken by violence or updated with other brands.